-
Inline Automatic Testing
Product Details
-
Customization code printer laser laser engraving machine
Product Details
-
DIO12 Test Board
Product Details
-
Automotive Lighting Tester
◎Log file is generated automatically.
◎Barcode label printing and pasting automatically.
◎Test cycle time: 45 seconds.
◎Full automatic automotive lighting test equipment, test the lamp color, intensity and current consumption.
◎General base concept, the fixture is changeable and multiple product can share the same line.
◎Embedded electric system, easy for upgrade.
◎Multiple UUT design, 4 UUTs testing simultaneously.
◎Log file is generated automatically.
◎Barcode label printing and pasting automatically.
◎Test cycle time: 45 seconds.
Product Details
-
Automotive ABS Speed Sensor Tester
◎ The voltage RMS value measurement is done by the oscilloscope.
◎ Log file is generated automatically.
◎ Automatic laser engraving after testing.
◎ Coil resistance measurement :Coil resistance value: 1250Ω±100Ω.
◎ Electric isolation test & leak current test:Apply for 660 VAC, withstand for 1 seconds, leak current is less than 1mA. Apply for 600VDC, the isolation resistance is larger than 1MΩ.
◎ The voltage RMS value measurement is done by the oscilloscope.
◎ Log file is generated automatically.
◎ Automatic laser engraving after testing.
◎ Run 2 products testing simultaneously.
Product Details
-
High Speed Data Cable Automatic Function Test System
Product Details
-
Online PCBA product code laser engraving machine
Product Details
-
4X16 Relay Matrix Board
Product Details
-
High Speed Data Cable Automatic Function Test System
◎Fully automatic, high volume, up to 4 decks of fixture, in-line system design included cable entry, cable test fixture and laser marking section.
◎Fully automatic, high volume, up to 4 decks of fixture, in-line system design included cable entry, cable test fixture and laser marking section.
◎Cable loaded on tray then move into system automatically Fixture makes all contacts for test.
◎Laser mark tested cable after test completed ,Tested cable remove from tray, empty tray send back for next cycle.
Product Details
-
Motion Control And Machine Vision Systems
◎Fast speed, stable and high reliability.
◎High positioning accuracy: 0.05mm.
◎Run either point test or curve trace test .
◎Utilize robot to test LCD touch panel and key pad.
◎Fast speed, stable and high reliability.
◎High positioning accuracy: 0.05mm.
◎Run either point test or curve trace test .
Product Details
-
Inline Robots Implementation
Product Details
-
Gyro accelerometer test
Swing Angle control;
Swing free fall;
Electronic brake;
Swing Angle control;
Swing free fall;
Electronic brake;
The gyro calibration;
Product Details
-
Online PCBA product code laser engraving machine
Product Details
-
Printer data acquisition and analysis board
Product Details
-
Air Leakage Tester
◎Automatic testing design and supporting ME S database application.
◎Safety Class: IP20.
◎Test cycle time is less than 17 seconds.
◎Ping-Pong mode testing operation. remove the handling time for 8 seconds.
◎Pressed air test and vacuum test available.
◎Automatic testing design and supporting ME S database application.
◎Safety Class: IP20.
◎Test cycle time is less than 17 seconds.
Product Details
-
Standard Inline
Product Details
-
Printer sensor simulation test board
Product Details
-
Particulate filter detector efficiency
Range of application:
Apply to the relevant inspection center, hospital, mask production enterprises, melt-blown fabric manufacturers, melt-blown fabric vendors, the customs inspection of melt-blown fabric process, raw material procurement to check, mask manufacturing inspection, inspection before shipment, etc.
The reference standard:
GB 2626-2019 Respiratory protection self-priming filter type anti particulate respirator 5.3 filter efficiency
GB/T 32610-2016 Daily protective mask technical specification attached A filtration efficiency test methods
GB 19083-2010 Medical respirator technical requirements 5.4 filtration efficiency
YY 0469-2011 Medical surgical masks 5.6.2 particle filtration efficiency
GB 19082-2009 Medical disposable protective clothing technical requirements 5.7 filtration efficiency
EN1822-3:2012 European standard high efficiency air filter single filter material experiment
EN 149-2001 Respirators European standard
EN14683:2005 Surgical masks the European standards
NIOSH 42 CFR Part84 Respirators American standard
Equipment is introduced:
2929ATO At is the latest research and development of automatic about material tester。
Applied to daily respirator, surgical masks, melt-blown fabric on the particulate filter efficiency testing and determination of the ordinary type of fabric, medical protective mask for a constant flow of air blocking performance.
Product Details
-
WIFI And Bluetooth Tester
◎Cover WIFI & bluetooth functionalities: power test, modulation,frequency error, sensitivity, PER.
◎RF chamber isolation: >70dB 0.6 GHz~ 2.4GHz >60dB 2.4GHz ~ 6GHz
◎4 up RF shielding chambers share one WIFI& bluetooth communication tester.
◎Cover WIFI & bluetooth functionalities: power test, modulation,frequency error, sensitivity, PER.
◎RF chamber isolation: >70dB 0.6 GHz~ 2.4GHz >60dB 2.4GHz ~ 6GHz
◎RF chamber interface: DB9、DB25、USB、SMA、RJ45、BNC、RCA、DC、AC.
Product Details
-
X-Ray Inspection and Checking Equipment using Robot
Product Details
-
Printer Mainboard Function Tester Board
Product Details
-
Type A fixture
Product Details
-
Smart Mobile Scanner MMI Test System
◎LCD Display test: Blemish test, Pixel Defects test.
◎Keypad test with key pressure measurement.
◎Windows CE firmware development.
◎LCD Display test: Blemish test, Pixel Defects test.
◎Keypad test with key pressure measurement.
◎Windows CE firmware development.
◎Acoustic test.
◎RFID, Wi-Fi, Bluetooth test.
◎Battery charging/Discharging test.
Product Details
-
Laser Engraving Equipment Automation
Product Details
-
Function Test Interface Board
Product Details
-
Type C fixture
Product Details
-
Digital Camera Calibration Tester
◎Multiple UUTs testing in parallel, up to 9 UUTs running simultaneously.
◎Ping-Pong mode testing operation, cycle time is optimized.
◎Log file is created automatically. support MES system.
◎Digital camera vignette, WB, BPC, DPC calibration and testing. .
◎Multiple UUTs testing in parallel, up to 9 UUTs running simultaneously.
◎Ping-Pong mode testing operation, cycle time is optimized.
◎Log file is created automatically. support MES system.
Product Details
-
Function test the transformation
Product Details
-
Type F fixture
Product Details
-
LED Panel In Line Fully Automatic Test Equipment
◎LED vertical line, horizon line and diagonal line scanning.
◎Customised pattern testing.
◎Embedded electronic system, easy for upgrade.
◎Standard 64x64 dots P2.5 LED panel testing,high speed testing,test cycle time is less than 10 seconds.
◎Generic test platform,replaceable fixture design for multiple products ,fixture and test program change over time is less than 10 minutes.
◎Intensity/Color/Hue test.
◎LED vertical line, horizon line and diagonal line scanning.
◎Customised pattern testing.
◎Embedded electronic system, easy for upgrade.
Product Details
-
Function Test Conversion Module
Product Details
-
Type E fixture
Product Details
-
Multiple Function ATE Platform
◎Machine vision is available.
◎Test log file generation capability.
◎Excellence for small volume and high product mix.
◎37∪industrial rack application.
◎Generic test platform concept share for multiple products testing customised fixture is replaceable.
◎Flexible instruments configuration, easy to add extra instruments.
◎Machine vision is available.
◎Test log file generation capability.
◎Excellence for small volume and high product mix.
Product Details
-
Small manual shielding box
Product Details
-
Auto RF shielding chamber(L)
Product Details
-
Auto RF shielding box (M)
Product Details
-
LED analyzer
Product Details